[CA] [CA11] adding DSM300 to C80

[CaptG]

GOOD MORNING

I have a C80 and I am looking to connect a DSM300. I have a depth/temp. transducer connected to my smart craft gauges Mercruiser part # 888828B2 My question is can I use this transducer for the DSM300 and keep it connected to the smartcraft gauges

thank you

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum G,

It is not possible to use the currently installed depth transducer from the SmartCraft system with a DSM300. The DSM300 was designed to be interfaced to the same set of fishfinder transducers which are designed for use with the CP370.

[CaptG]

is there a transducer that has temp/depth combined that I can use? and will airmar transducer work with the set up

[Chuck - Raymarine - Moderator]

G,

Should you click on the link provided within my initial response, it will open the web page of compatible transducers. There you will see tabs titled "Depth & Temperature" and "Depth, Speed & Temperature". Clicking on those tabs will list the compatible transducers having these features, their part numbers, an specifications. If considering use of an Airmar branded transducer with a DSM300, then it would be recommended that Gemeco, Inc. (Airmar’s US distributor (803 693 0777)) be contacted for information concerning compatible Airmar transducers.

[CaptG]

Ok Thank You, Chuck

[Chuck - Raymarine - Moderator]

You're welcome.