European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Networking / System Integration 
/
[CA] [CA11] eS98 to networking switch
/
[CA] [CA11] eS98 to networking switch
|
[CA] [CA11] eS98 to networking switch
|
|
04-14-19, 07:26 PM
(This post was last modified: 04-17-19 03:56 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[CA11] eS98 to networking switch
This winter I added a Backbone and Networking switch. I'm having difficulty connecting the switch to my eS98. What cable is used from the switch and where on the back of the eS do I connect?
|
|||
|
|
04-17-19, 03:56 PM
Post: #2
|
|||
|
|||
|
RE: [CA11] eS98 to networking switch
Welcome to the Raymarine Forum Seahorse,
What model of network switch did you install? |
|||
|
|
|
04-19-19, 05:45 PM
(This post was last modified: 04-22-19 12:42 PM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
|
RE: [CA11] eS98 to networking switch
HS5. The book says to use a e series A06061. It does not plug into anything I own.
What did I order wrong |
|||
|
|
|
04-22-19, 12:48 PM
Post: #4
|
|||
|
|||
|
RE: [CA11] eS98 to networking switch
Seahorse,
The A06061 E-Series to Seatalk Adapter Cable is designed to support interfacing an E-Series Classic MFD's (E80, E120) SeaTalk2/NMEA 2000 port to a spur socket within a system's powered and properly terminated SeaTalkng / NMEA 2000 backbone ... this adapter is not applicable to eS-Series MFDs. Instead, an appropriate length of RayNet (F) to RayNet (F) Cable would be used to interface one of the Ethernet Network sockets of the eS-Series MFD to one of the Ethernet Network sockets of the HS5 RayNet Network Switch. |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)