Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Axiom, HS5 network switch and NMEA 0183

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom, HS5 network switch and NMEA 0183
05-21-19, 10:09 PM (This post was last modified: 05-24-19 10:05 AM by Chuck - Raymarine - Moderator.)
Post: #1
tl454c Offline
Junior Member
**
 		Posts: 5
Joined: Apr 2017
Reputation: 0
[CA11] Axiom, HS5 network switch and NMEA 0183
So I have upgraded my electronics (E120 classic) with an Axiom 12 and a Axiom 9 and I am using a HS5 network switch to interface the displays and the digital radar.
The one thing I did not take into consideration was the NMEA 0183 connection for my VHF DSC. I have the NMEA multiplexer currently installed.
Sorting through the forum I cannot find a solution for just using the HS5 switch, but it appears that you can use a seatalkng network, is there a solution to just use the HS5 switch?
Thanks
Find all posts by this user
Quote this message in a reply
05-24-19, 10:07 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom, HS5 network switch and NMEA 0183
Welcome to the Raymarine Forum,

Q. Is there a solution to just use the HS5 switch?
A. Negative. The recommended solution would be to use data from the SeaTalkng backbone. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication