Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] AR200 connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AR200 connection
05-21-19, 03:07 PM (This post was last modified: 05-23-19 03:51 PM by Chuck - Raymarine - Moderator.)
Post: #1
engenharia2 Offline
Junior Member
**
 		Posts: 31
Joined: Jul 2016
Reputation: 0
[CA11] AR200 connection
Hi,

I have a doubt Clear Cruise, I could not find any information if is possible connect the AR200 sensor on the Inline terminator to connect on my 5way connector? I have a problem with the distance between the AR200 and my 5way connector.
Find all posts by this user
Quote this message in a reply
05-23-19, 03:50 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] AR200 connection
Welcome to the Raymarine Forum Felipe,

Q. I could not find any information if is possible connect the AR200 sensor on the Inline terminator to connect on my 5way connector?
A. It is indeed possible to do so with any product featuring a SeaTalkng or NMEA 2000 communications interface.
Find all posts by this user
Quote this message in a reply
05-24-19, 07:21 AM
Post: #3
engenharia2 Offline
Junior Member
**
 		Posts: 31
Joined: Jul 2016
Reputation: 0
RE: [CA11] AR200 connection
Chuck,

thank you.
Find all posts by this user
Quote this message in a reply
05-24-19, 07:34 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] AR200 connection
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication