[CA] [CA11] Evo autopilot and garmin gps
|
06-23-19, 10:24 AM
(This post was last modified: 06-24-19 12:34 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Evo autopilot and garmin gps
Hello
I’m still working through evo autopilot issues with my garmin gpsmap720p, I have been told to but a NMEA 0183 to sign converter made by actisence, before spending another 300$ on this device is raymarine sure this will correct the track issue, I’ve included a video indicating the problem in track mode, if there are any other ways around this problem other then spending more money I would like to go down that avenue If there is not could you please confirm this additional device will fix my issue |
|||
06-24-19, 12:39 PM
Post: #2
|
|||
|
|||
RE: [CA11] Evo autopilot and garmin gps
Welcome to the Raymarine Forum relentless,
This symptom shown within your video is indeed that which the Actisense NGW-1-ISO-STNG was recommended to address. In this case the NGW-1's NMEA 2000 cable would be plugged into a spur socket within the backbone. The NMEA 0183 input leads of the NGW-1 would be interfaced to the NMEA 0183 output leads/terminals of the Garmin chartplotter. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)