Raymarine forum / Raymarine Forums / Autopilots v / S1G Course Computer Compatibility

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
S1G Course Computer Compatibility
05-25-16, 09:08 PM (This post was last modified: 05-26-16 07:12 AM by Chuck - Raymarine - Moderator.)
Post: #1
jefndeb Offline
Mainship 400
***
 		Posts: 54
Joined: Feb 2016
Reputation: 0
S1G Course Computer Compatibility
Can I use a S1G Course Computer Model E12122 with a Mark II Wheel Drive & ST6002 control head on a sailboat?
Find all posts by this user
Quote this message in a reply
05-26-16, 07:12 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: S1G Course Computer Compatibility
Welcome to the Raymarine forum jefndeb,

It is indeed possible to interface a S1G Autopilot Course Computer and ST60002 Autopilot to a Mark II Wheel Drive.
Find all posts by this user
Quote this message in a reply
06-03-16, 09:18 AM
Post: #3
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: S1G Course Computer Compatibility
jefndeb,

The ST6002 Autpilot Control Head will function with a S1G running any version of software. The final release of S1G Autopilot Course Computer software was v4.63. The S1G software may be updated by a Certified Raymarine Installer or by Raymarine’s Product Repair Center.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication