Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] AIS 700 to Pc

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AIS 700 to Pc
06-27-19, 10:32 AM (This post was last modified: 06-27-19 12:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 4
Joined: Jul 2018
Reputation: 0
[CA11] AIS 700 to Pc
Hi
I see the Ais 700 can connect to a PC via USB
Is this just for setup and diagnostics or will it produce a display?
Already have a comar receiver producing a display on PC using Sea Clear and qtVlm
and would like the transmit capability without an MFD or Chartplotter
Find all posts by this user
Quote this message in a reply
06-27-19, 12:09 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] AIS 700 to Pc
jmsts0465,

The primary purpose of the AIS700's USB communications interface is for initialization and diagnostics purposes in conjunction with the ProAIS2 application. The USB driver is installed during installation of the latest ProAIS2 posted with the AIS product software on Raymarine's Product Software web page. The AIS700 must not be interfaced to the PC when installing the ProAIS2 software.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication