Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] new MFD and old Seatalk

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] new MFD and old Seatalk
07-31-19, 01:32 PM (This post was last modified: 08-02-19 03:08 PM by Chuck - Raymarine - Moderator.)
Post: #1
sjeskilson Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2019
Reputation: 0
[CA11] new MFD and old Seatalk
Hello,
so I just ordered an Axiom 7 to replace my OE 435i. Do I need to run new wiring to plug it in for power? Also, can it talk to my remaining legacy St60s and 4000+?
Thanks
Find all posts by this user
Quote this message in a reply
08-02-19, 03:13 PM (This post was last modified: 08-02-19 03:15 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] new MFD and old Seatalk
Welcome to the Raymarine Forum sjeskilson,

Q1. Do I need to run new wiring to plug it in for power?
A1. Yes. The Power/NMEA 2000 Cable supplied with the Axiom MFD must be used when replacing the RC435i.

Q2. Also, can it talk to my remaining legacy St60s and 4000+
A2. Yes. Raymarine offers the E22158 SeaTalk to SeaTalkng Converter Kit to support interfacing ST60/ST60+ instruments and ST4000+/ST5000+ autopilots to currently manufactured chartplotting products such as Axiom. Please click here to view a thread in which I had previously addressed this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication