[CA] [CA11] Classic E80 Series mounting gasket

[distand]

Would anyone have a suggestion on what I could use for a gasket for an E80 MFD. I need to re-mount my unit and I don't see that the original gaskets are still available. I was thinking I might need to use some silicone or possibly some butyl rubber (rubber cement it together). I will be updating to a newer unit in the near future but for now I do need to continue using the E80.

Thanks

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum distand,

Raymarine provides surface mount gaskets which are manufactured from neoprene. Silicone or similar sealants would not typically be recommended as a substitute for the supplied gaskets, primarily because the such sealants can very difficult to remove and may damage plastic parts. I found this relatively inexpensive neoprene sheet from Grainger during a quick search of the Internet.