Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] eci 100

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] eci 100
03-14-16, 07:03 AM (This post was last modified: 10-01-19 09:11 AM by Chuck - Raymarine - Moderator.)
Post: #1
Bad Bait Bill Offline
Junior Member
**
 		Posts: 12
Joined: Feb 2016
Reputation: 0
[CA11] eci 100
I have an Evinrude Etec with a NEMA 2000 plug. Is the ECI 100 the "backbone" I need to interface the Etec with my A98?
Find all posts by this user
Quote this message in a reply
03-14-16, 08:49 AM (This post was last modified: 10-01-19 09:12 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] eci 100
Welcome to the Raymarine Forum Bill,

The ECI-100 is not a SeaTalkng/NMEA 2000 backbone. The ECI-100 is an engine gateway. Please click here to view a FAQ addressing this subject. At the time of this response, the ECI-100's software did not support Evinrude E-TEC engines.
Find all posts by this user
Quote this message in a reply
09-30-19, 08:17 PM (This post was last modified: 10-01-19 09:12 AM by Chuck - Raymarine - Moderator.)
Post: #3
Robinsonh2o Offline
Junior Member
**
 		Posts: 28
Joined: Apr 2016
Reputation: 0
RE: [CA11] eci 100
Chuck, does the eci-100 now support evinrude gen 1 e-tecs?
Find all posts by this user
Quote this message in a reply
10-01-19, 10:36 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] eci 100
Robinsonh2o,

As of the time of this response, nothing has changed since my initial response to this thread.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication