Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] EV-1 Transmission speed

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] EV-1 Transmission speed
10-18-19, 06:05 PM (This post was last modified: 10-21-19 02:12 PM by Chuck - Raymarine - Moderator.)
Post: #1
MBileckyj Offline
Junior Member
**
 		Posts: 17
Joined: Aug 2018
Reputation: 0
[CA11] EV-1 Transmission speed
Can you please advise the transmission speed of data from the EV-1

I would like to use this to provide heading data to a Furuno radar plotter (RDP149( for target tracking (ARPA), by fitting an ARPA board.
Furuno advise that the min speed required is 25ms

Thanks
Find all posts by this user
Quote this message in a reply
10-21-19, 02:19 PM (This post was last modified: 10-21-19 02:24 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] EV-1 Transmission speed
Welcome to the Raymarine Forum MBileckyj,

The data update rate for the EV-1, EV-1, and AR200 is 10Hz, which corresponds to an interval rate of 0.1 seconds. I would recommend double checking within Furuno, as an interval rate of 25 milliseconds (0.025 seconds) would require a 40Hz heading update rate. There aren't many offerings in the recreational market supporting 40Hz heading updates.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication