Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] C120 Classic wont boot or update

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] C120 Classic wont boot or update
11-17-19, 09:59 AM (This post was last modified: 11-18-19 01:07 PM by Chuck - Raymarine - Moderator.)
Post: #1
craig86 Offline
Junior Member
**
 		Posts: 2
Joined: Oct 2019
Reputation: 0
[CA11] C120 Classic wont boot or update
My Raymarine C120 Classic was stuck in boot loop

I followed the advice given and tried to update it however it got stuck at 27%

I eventually had to turn it off now it hangs at 0% when trying to update.

Any advice is appreciated
Find all posts by this user
Quote this message in a reply
11-18-19, 01:15 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] C120 Classic wont boot or update
Welcome to the Raymarine Forum Craig,

It is recommended that any chart card be removed from the MFD's memory card reader and that a Factory Reset be performed to restore operation of the C-Series Classic MFD. The most common cause for a MFD to not accept a software update is due to an incompatible CF memory card. Please click here to view a FAQ addressing recommendations for those seeking to update the software within an A/C/E-Series Classic MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication