European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Networking / System Integration 
/
[LW] [LW11] Compatibility with NMEA2000 when SeaTalkNG and SeaTalk products are connected
/
[LW] [LW11] Compatibility with NMEA2000 when SeaTalkNG and SeaTalk products are connected
|
[LW] [LW11] Compatibility with NMEA2000 when SeaTalkNG and SeaTalk products are connected
|
|
12-03-19, 06:43 AM
(This post was last modified: 12-05-19 05:08 AM by Louise - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[LW11] Compatibility with NMEA2000 when SeaTalkNG and SeaTalk products are connected
In the SeaTalkNG reference manual (81300-1) on page 6, there is this paragraph about limitations:
"If SeaTalkng and SeaTalk(1) products are used together, do NOT connect an NMEA2000 backbone, as this product combination could compromise the integrity of the NMEA2000 system." I am not sure I understand this correctly. Does that mean that NMEA2000 devices cannot be connected to the SeaTalkNG backbone when, e.g., a SeaTalk to SeaTalkNG converter (E22158) is used? The manual for the converter doesn't mention anything like that. |
|||
|
|
12-05-19, 05:16 AM
Post: #2
|
|||
|
|||
|
RE: [LW11] Compatibility with NMEA2000 when SeaTalkNG and SeaTalk products are connected
Dear svdlinden,
The use of ST1 products networked with a STng system is fine as long as networked correctly. The manual needs updating, this is referring to the earlier days of STng. I will get this attended to. Many Thanks Louise |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 3 Guest(s)