Threaded Mode | Linear Mode

unixdood

Hi,
I have an Airmar B66VL (Raymarine 78918) which has 2 connectors on it. I would like to connect this to my DSM30. I was told I need a "Y" adapter to do this? DO you have a part number from Raymarine that I need to order?

Thanks in advance
Bill

***Chuck - Raymarine - Moderator*** · 02-03-20, 04:08 PM

Welcome to the Raymarine Forum Bill,

It appears that you have been incorrectly advised. The M78918 is a version of the B744VL which was designed to be mated to a ST50 instrument. As indicated within the FAQ found here, instrument transducers cannot be adapted to support the fishfinder application features of a MFD or fishfinder sounder module. The last version of the B744VL which Raymarine had sold which had been designed for use with a DSM30/300/250 had the part #A66092. If considering use of the DSM30 with your system, then it would be recommended that the A66092 variant of the B744VL transducer be used.

unixdood · 02-04-20, 05:50 AM

thanks Chuck for getting back to me on this! Much appreciated

***Chuck - Raymarine - Moderator*** · 02-04-20, 08:27 AM

You're welcome.