Raymarine forum / Raymarine Forums / Multifunction Displays v / loss of GPS depths after software update

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
loss of GPS depths after software update
06-19-16, 04:03 PM
Post: #1
btorra Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2016
Reputation: 0
loss of GPS depths after software update
After updating my E7d software, I have lost the depths (numbers) that appear on the chart. The GPS is giving me a signal/fix. I performed a systems and data rest and still don't have complete chart bearings. I also updated my Navionics charts thinking that might be it, but afterwards I still show no depths on my chart. The transducer provided a reading but no chart depths. Has this happened to anyone else. Is there a fix?
Find all posts by this user
Quote this message in a reply
06-21-16, 12:38 PM (This post was last modified: 01-11-17 01:45 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: loss of GPS depths after software update
Welcome to the Raymarine Forum btorra,

The most common cause for such issues is associated with failure to use the Chart application's Chart Selection feature (MENU->PRESENTATION->CHART SELECTION) to specify what cartography is to be viewed within the Chart application page/pane being viewed. Prior releases of a/c/e/eS/gS-Series MFD software had defaulted this setting to Navionics Nautical Charts. With the increasing popularity of Raymarine's LightHouse Charts among owners of a/c/e/eS/gS-Series MFDs, commencing with v17.45 this default setting has now been changed to LightHouse Charts. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication