Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] SeaTalk Network Diagram Sail Navigation

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] SeaTalk Network Diagram Sail Navigation
04-03-20, 11:38 AM (This post was last modified: 04-03-20 12:06 PM by Chuck - Raymarine - Moderator.)
Post: #1
Jetskimom Offline
Junior Member
**
 		Posts: 1
Joined: Dec 2019
Reputation: 0
[CA11] SeaTalk Network Diagram Sail Navigation
Do I need a designated power connection from the backbone using a spur cable?
Please look for conflicts, errors and omissions, Thank you.
All suggestions welcome.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
04-03-20, 12:24 PM (This post was last modified: 04-03-20 12:33 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] SeaTalk Network Diagram Sail Navigation
Welcome to the Raymarine Forum

Q1. Do I need a designated power connection from the backbone using a spur cable?
A1. Yes. Please click here to view a FAQ addressing this subject.

Q2. Please look for conflicts, errors and omissions.
A2. With the exception of the issue addressed in Q1, your diagram appears to be correct. Please click here to view a FAQ addressing installation of power circuits for marine electronics. Please additionally click here to view a FAQ addressing installation of power circuits for marine electronics.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication