[TG] EV 150 Autopilot

[Waterboy]

My 42 power boat has a Seastar 2- hydraulic steering system with a Ba 175 -7Tm cyclinder ( model HC5319) . The steerng system has 2 hoses between the helm and rudder cylinder .

I purchased a Raymarine EV 150 AutoPilot system with a Type 1 drive motor . Must I run a ( new) low pressure hose from the new drive pump to the helm assembly?

Thanks

Reale

[Tom - Raymarine - Moderator]

Hello Reale,

Yes, the Reservoir line from the helm reservoir to the autopilot pump is required. A typical system is shown by the 'Two line' illustration in the pump installation guide.

Regards,
Tom