AIS 350 connection to two C80 Chart Plotters

[FootLoose_Norm]

Would I be able to connect a Raymarine AIS350 to two Raymarine C80 Chartplotters using NEMA0183-34800 connections. One C80 is on the upper helm while the other C80 is located on the lower helm. This would be for a simultaneous display of AIS targets on both C80 chartplotters. I am currently using NEMA0183-4800 from my upper helm C80 for connection to a Standard Horizon GX2100 VHF marine radio for GPS information on the radio.

[Chris - Raymarine - Moderator]

Hello FootLoose_Norm,

This would not work. My recommendation would be to connect the AIS to the display where it would be viewed the most,

Regards,

Chris,