Raymarine forum / Raymarine Forums / Autopilots v / Type 1 pump adaptor threads don't connect

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Type 1 pump adaptor threads don't connect
03-31-17, 10:31 PM
Post: #1
RayJoe46 Offline
Junior Member
**
 		Posts: 3
Joined: Mar 2017
Reputation: 0
Type 1 pump adaptor threads don't connect
I have a Raymarine type 1 pump. I am trying to replace the hydraulic hoses. The pump install guide says the pump adaptors are npt thread, but all of the npt threaded fittings I have tried will only screw in about 2 threads. I have gone to 3 different hydraulic hose companies to try and get a hose fitting to fit either the adaptor or the pump direct and have not had any luck. Do I have a poorly threaded adaptor and if so, how can I get replacements.
Find all posts by this user
Quote this message in a reply
04-03-17, 12:09 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Type 1 pump adaptor threads don't connect
Welcome to the Raymarine Forum RayJoe46,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication