European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
Linear Rudder Position Sensor
|
|
04-03-17, 04:40 PM
Post: #1
|
|||
|
|||
|
Linear Rudder Position Sensor
I recently had my hydraulic steering seals replaced and came back to my unit with the rudder position sensor disconnected from the ram. I reconnected the end to the ram, but noticed the seal a the end of the sensor was disconnected.
Is there some sort of fluid that needs to be in the sensor, or can I simply tighten the seal? |
|||
|
|
04-04-17, 09:37 AM
Post: #2
|
|||
|
|||
|
RE: Linear Rudder Position Sensor
Welcome to the Raymarine Forum Travis,
Q. Is there some sort of fluid that needs to be in the sensor, or can I simply tighten the seal? A. No. Raymarine's rotary rudder reference units are not fluid filled. They are however sealed to prevent water intrusion. |
|||
|
|
|
04-04-17, 04:01 PM
(This post was last modified: 04-04-17 04:03 PM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
|
RE: Linear Rudder Position Sensor
Thank you. I'll cross my fingers that no corrosion happend during the time the seal was loose.
|
|||
|
|
|
04-04-17, 04:03 PM
Post: #4
|
|||
|
|||
|
RE: Linear Rudder Position Sensor
You're welcome.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)