[CA] [CA11] Intagration of the ClearCruise System

[Chuck - Raymarine - Moderator]

Jeff,

Q. Power up the system and check the network source settings to confirm that the heading source is set to AR-200 and also see if the GPS source is the AR-200 or the Axiom...
A. Whether automatically selected or not, the Manual selection option should be enabled, and the AR-200 should be selected as the Data Source for each of the following:
- Heading
- GPS
- Datum
- Date & Time

After doing so, the SPX30 may again be connected to the backbone, the boat taken out, steadied onto a heading, and the autopilot should then be commanded into Auto mode. Should no errors be reported by the autopilot and should the autopilot steer to the locked heading (i.e. the heading of the vessel when Auto mode was commanded)