Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 interface to ST60 instruments
01-16-20, 11:14 PM (This post was last modified: 01-17-20 09:56 AM by Chuck - Raymarine - Moderator.)
Post: #11
RE: [CA11] Axiom 9 interface to ST60 instruments
Hi Chuck

Do I need to upgrade the software in the 150G course computer and ST6001+. Are there any updates available for these legacy products?

Thanks

Kirk
Find all posts by this user
Quote this message in a reply
01-17-20, 09:57 AM
Post: #12
RE: [CA11] Axiom 9 interface to ST60 instruments
Kirk,

Q. Do I need to upgrade the software in the 150G course computer and ST6001+. Are there any updates available for these legacy products?
A. Negative. No software updates are available for these products.
Visit this user's website Find all posts by this user
Quote this message in a reply
01-19-20, 04:32 PM (This post was last modified: 01-20-20 08:22 AM by Chuck - Raymarine - Moderator.)
Post: #13
RE: [CA11] Axiom 9 interface to ST60 instruments
Hi again Chuck.... and thanks again for all your support. Questions:

1)Can the 150G/ST6001+ be controlled from the Axiom? I have everything connected and it seems to be communicating e.g) autopilot parameters are available on the sidebar. I wasn't able to activate the Pilot control and I don't have a Pilot icon showing so I'm wondering if I will only have control from ST6001+.

2)Will the pilot be able to follow a route automatically?

I haven't done any sea trials yet.

Kirk
Find all posts by this user
Quote this message in a reply
01-21-20, 11:35 AM
Post: #14
RE: [CA11] Axiom 9 interface to ST60 instruments
Kirk,

Q1. Can the 150G/ST6001+ be controlled from the Axiom? I have everything connected and it seems to be communicating e.g) autopilot parameters are available on the sidebar. I wasn't able to activate the Pilot control and I don't have a Pilot icon showing so I'm wondering if I will only have control from ST6001+.
A1. Please click here to view a FAQ addressing this subject.

Q2. Will the pilot be able to follow a route automatically?
A2. This question is also addressed within the FAQ referenced in my response to Q1.
Visit this user's website Find all posts by this user
Quote this message in a reply
01-21-20, 11:15 PM (This post was last modified: 01-22-20 08:07 AM by Chuck - Raymarine - Moderator.)
Post: #15
RE: [CA11] Axiom 9 interface to ST60 instruments
thanks very much Chuck!
Find all posts by this user
Quote this message in a reply
01-22-20, 08:08 AM
Post: #16
RE: [CA11] Axiom 9 interface to ST60 instruments
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)