[CA] [CA11] Axiom 9 interface to ST60 instruments

[Captain Kirk]

Chuck

Thanks for the quick and concise response, I think I've got a clear picture now of the path forward as i will go with this simplified method you have suggested. 3 follow up questions.

1) can I clip off the press fit 3 pin connector from the kit supplied yellow connector cable in order to connect it to the ST (a) on the 150G? (keeping in mind also that I will not connect the red lead)?

2) Do i leave the 12V - 15Amp circuit connected to the ST60 Speed instrument? There is also power coming from the ST (b) cable to the ST6001+ .
As the system is wired now I can leave the Autopilot switch/breaker turned off and still have the other the ST units powered from the separate supply. (this is not a big deal as I normally have both powered up anyway but i would like to keep it if possible.)

3) Is there a cable available to connect directly from the ST/Stng converter -white connector to the Axiom input? It will need to be approx. 12'

Thanks again
Kirk

Axiom arrives this week - cant wait to get it installed>

Thanks again