[CA] [CA11] Connecting older B60 to Axiom 12 RV

[Chuck - Raymarine - Moderator]

Welcome back to the Raymarine Forum dtfeld,

Transducers designed to be directly (i.e. no adapter on transducer cable) mated to a DSM300 may instead be adapted to be mated to the Transducer socket of an Axiom DV MFD (adapter part #A80485) or Axiom RV MFD (adapter part #A80489). Raymarine also offers a Y-Cable (part #A80492) to permit the Transducer socket of an Axiom RV MFD to be simultaneously connected to the B60 transducer and to a RealVision transducer. If a Y-Cable is installed, then both transducers must be installed or the MFD will not support fishfinder features. Sonar imaging and performance of an Axiom MFD running should be similar to that achieved with the DSM300. That said, it would be recommended that the DSM300 be retained until satisfying yourself with the performance of the MFD's internal fishfinder circuity.