Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] SmartPilot X-5 (SPX-5)Tiller System
02-11-20, 05:51 PM (This post was last modified: 02-12-20 08:55 AM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] SmartPilot X-5 (SPX-5)Tiller System
May the standard linear drive unit be replaced with a ST4000 Grand Prix tiller drive unit WO86, SPX5GP without alteration to the installed system?
Find all posts by this user
Quote this message in a reply
02-12-20, 09:57 AM
Post: #2
RE: [DG11] SmartPilot X-5 (SPX-5)Tiller System
Hi Emerald 76

Thankyou for your enquiry,

The Standard ST4000Tiller drive can indeed be replaced with the Grand prix equivalent, with no further system modification (assuming that you have installed the existing ST4000Tiller drive at the correct mounting dimension, used adequate size cable etc . . . ..
Thanks
Derek
Find all posts by this user
Quote this message in a reply
02-12-20, 03:46 PM (This post was last modified: 02-13-20 08:36 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [DG11] SmartPilot X-5 (SPX-5)Tiller System
Hello Derek

Thank you for your prompt helpful reply.
Find all posts by this user
Quote this message in a reply
02-13-20, 11:38 AM
Post: #4
RE: [DG11] SmartPilot X-5 (SPX-5)Tiller System
Hi Emerald 76


You're welcome

all the best wishes
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)