Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW11] How to make a WP with bearing and range.
02-13-20, 03:41 AM (This post was last modified: 02-14-20 06:48 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] How to make a WP with bearing and range.
Hi, I'm running Lighthouse 3.11 on a Axiom MDF and i wonder to make a waypoint introducing the bearing and distance. I didn't find how, another's brands say to that option project waypoint.
Find all posts by this user
Quote this message in a reply
02-25-20, 12:42 AM
Post: #2
RE: [TG11] How to make a WP with bearing and range.
Hello AlesPC,

At this stage our displays don't allow entering a waypoint by range and bearing, only by lat/lon, at the current vessel position or at the cursor position. You can quickly find a particular range and bearing on the chart with the 'Cursor info boxes' option (on the Advanced tab in the chart setup menu) and then place a waypoint at the cursor.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)