Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW11] Element 9s NMEA Rx
02-18-20, 03:56 AM (This post was last modified: 02-18-20 07:06 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Element 9s NMEA Rx
I am interested in buying an Element 9s plotter. However, I wish to feed my 0183 TackTick wind instrument with GPS-data from the plotter (after converting between 0183 and 2000). The TackTick then calculates and presents TWS and TWA from the GPS data.
Question: The plotter manual states that the corresponding NMEA 2000 sentences are "only transmitted to DSC VHF radios when Send GPS to VHF setting is enabled from the GPS/GNSS Settings menu".
Should I take this to mean that GPS data can only be transmitted to VHF and not e.g. to a wind instrument, or that the GPS data can be read by any equipment (conforming to NMEA 2000) but that reading by VHF must be enabled in the plotter menu?
Find all posts by this user
Quote this message in a reply
02-21-20, 11:53 AM
Post: #2
RE: [LW11] Element 9s NMEA Rx
Dear matsev,

Thank you for your post.

This is correct. The NMEA2000 GPS is VHF output only.

Many Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)