[CA] [CA11] Axiom Pro with CP570 and dual 2kw Transducers

[Fish On]

Chuck,
So what are the least chance's of getting interference on my dual Axiom Pro RVX's.
Between my 2k R109LH, connected to a CP570. And running an additional medium frequency transducer.
My set-up;
RV212 connected to one Axiom Pro RVX.
Two Potential option; just add a medium 1kw transducer.
B175M, or B265LM.
Or, CP570 with a 2kw R409LM-W.
I prefer the CP570 with the 2kw R409LM-W as my 1st option, but fear the interference.
If you believe there's a high probability of interference, I don't want to take that chance.
Can I run all transducers at the same time?
I don't mind running either the R109LH and R409LM-W at different times.
Or, running the RV212, with R109LH with the R175M or R265LM.
Lastly, Not sure how far apart they have to be from all transducers.Dual RV212, R109LH. Same goes with B175M and B265LM.