Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo
03-30-20, 11:14 AM (This post was last modified: 03-30-20 04:10 PM by Chuck - Raymarine - Moderator.)
Post: #5
sv_atlas Offline
Junior Member
**
 		Posts: 7
Joined: Feb 2020
Reputation: 0
RE: [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo
Hi Chuck,

A few more questions, all related.

Q1: Assuming I wish to to track DSC targets on my Axiom Pro and have a 2008 Ray218, would the E70196 provide that functionality rather than utilizing the Actisense Gateway?
Q2: Assuming I have the AR200 plugged in to the network will utilizing the E22158 from the network to the SG3 be sufficient for providing the required heading data for functionality? This, again, would eliminate the use of the Actisense gateway.
Q3: For GPS data for our EPIRB, would we be able to patch in to the E70196, again eliminating the Actisense gateway?

Thank you,

Brian
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo - sv_atlas - 03-30-20 11:14 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication