Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo
04-28-20, 11:38 AM
Post: #11
sv_atlas Offline
Junior Member
**
 		Posts: 7
Joined: Feb 2020
Reputation: 0
RE: [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo
Chuck,

That’s fantastic, thank you.

If I understand it correctly, to do a wired connection from my sailboat mast to my pod mounted Axiom Pro in the cockpit I will need the following to be connected in this order:

Quantum Digital Doppler Radar
A80308 (Y-Adapter Cable)
A55081D (10m Radar Extension Cable)
A80228 (10m Digital Radar Cable, Power and Ethernet)
SPLIT, with power going to my switched 12V power circuit
A80162* (Raynet(M) to Raynet(M) adapter cable
Supplied Raynet (F) to Raynet (F) (supplied w/Radar when purchased)
Axiom Pro

*In the cited knowledge base article you referenced (https://forum.raymarine.com/showthread.php?tid=421) it is recommend to use an A80160 (Binnacle mounted pod/no network switch) however I believe A80162 is the correct joiner in this case.

Thank you.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo - sv_atlas - 04-28-20 11:38 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication