Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Older Transducer Indentification

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Older Transducer Indentification
03-07-20, 09:47 AM (This post was last modified: 03-09-20 01:36 PM by Chuck - Raymarine - Moderator.)
Post: #1
Paul Gavaza Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2019
Reputation: 0
[CA11] Older Transducer Indentification
I am looking to identify pin point functions for a transducer plug. It is a depth speed and temp from a removed Raytheon L750 fishfinder with 5 pin points. I have not been able to find a wiring diagram for it. Any help would be appreciated.
Find all posts by this user
Quote this message in a reply
03-09-20, 01:39 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Older Transducer Indentification
Welcome to the Raymarine Forum Paul,

Please note that L750 transducers were produced by Airmar, Inc. for Raymarine. During manufacturing, a tag was affixed to the plug end of the transducer's cable. In order that we may positively identify the transducer, please attach a photo of the transducer's identification tag which clearly shows all information printed on the tag.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication