Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Networked es127 MFDs not Sharing Data
06-08-16, 01:27 AM
Post: #1
Networked es127 MFDs not Sharing Data
Just installed a Quantum Radar and two es127 displays connected via SeatalkNG backbone per Reference Manual 81300-1, but the displays are not sharing charts, sonar, or radar data. Updated both MFDs to Lighthouse II Ver. 17, and Quantum radar to latest software with no change. There are no Data Master messages on startup and the data master menu shows only the local MFD on each display. In <Setup <diagnostics <Select Device all devices on the SeatalkNG bus show up and report S/N and software version appropriately. So, the MFDs are seeing each other on the network, but not sharing data across it. Any suggestions for a fix, or further troubleshooting that can be done? Thanks!
Find all posts by this user
Quote this message in a reply
06-09-16, 10:10 AM
Post: #2
RE: Networked es127 MFDs not Sharing Data
Welcome to the Raymarine Forum aaeejrb,

Cartography, radar imagery, fishfinder imagery, SiriusXM Satellite Marine Weather, thermal camera control, and IP camera video cannot be shared among a/c/e/eS/gS-Series MFDs which have been interfaced to one another via a SeaTalkng communications backbone.

Please click here to view a FAQ addressing this subject.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)