Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] E wide intermittent will not power up
03-22-20, 06:38 PM (This post was last modified: 03-24-20 12:31 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] E wide intermittent will not power up
I then pull the card out, unplug the connectors, re-plug the power cord and the units powers on. Re plug other connectors and works fine. next day will not power up until repeat the above. Getting 12.6 volts at power plug. Any thoughts? Thank you. John
Find all posts by this user
Quote this message in a reply
03-24-20, 12:34 PM
Post: #2
RE: [CA11] E wide intermittent will not power up
Welcome to the Raymarine Forum John,

Try removing the chart card alone before powering the system on in order to determine whether there may be an issue with the chart card (or potentially with the MFD's memory card reader).
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)