The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] Axiom - Fuel Remaining shows ---, why?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Axiom - Fuel Remaining shows ---, why?
03-27-20, 11:41 AM (This post was last modified: 05-21-20 10:27 PM by Tom - Raymarine - Moderator.)
Post: #1
DaveInDevon Offline
Junior Member
**
 		Posts: 4
Joined: Mar 2020
Reputation: 0
[TG11] Axiom - Fuel Remaining shows ---, why?
This is a new Axiom 9 installation and the Fuel Remaining shows --- (dashes), why ?
I have set the Total Fuel Capacity to 640 litres
I have set the Fuel Calculation to use PGN 127489 using data from Yacht Devices Engine Gateways (2 x YDES04 from twin KAMD300) on the same N2K network as the Axiom.
I have set 'all tanks' Full

So why doesn't the estimated Fuel remaing show 640 litres ?

On the N2K network there is also a Yacht Devices Voyage Recorder (YDVR04) which is receiving the fuel rate from each engine - so I know that the Engine Gateways are sending the data.
The Axiom also shows a total fuel used of 1.9 litres, so it is getting the fuel rate from the network.
Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Axiom - Fuel Remaining shows ---, why? - DaveInDevon - 03-27-20 11:41 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication