Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] 3 MFDs Through HS5 RayNet Network Switch?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] 3 MFDs Through HS5 RayNet Network Switch?
04-10-20, 08:25 AM (This post was last modified: 04-10-20 08:28 AM by Chuck - Raymarine - Moderator.)
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] 3 MFDs Through HS5 RayNet Network Switch?
Steve,

You're welcome. Unfortunately, software updated (i.e. LightHouse II) for the MFDs which are involved are no longer being produced. Had these been Axiom/Axiom Pro/Axiom XL MFDs (they run LightHouse 3 software), then a feature request would be logged accordingly consider password access to control the MFD within a future LightHouse 3 software update. The only alternative would be to install a dayligh viewable marine monitor at the remote location, which would in turn repeat the screen image of one of the system's currently installed MFDs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] 3 MFDs Through HS5 RayNet Network Switch? - Chuck - Raymarine - Moderator - 04-10-20 08:25 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication