Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] 3 MFDs Through HS5 RayNet Network Switch?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] 3 MFDs Through HS5 RayNet Network Switch?
04-29-20, 01:59 PM (This post was last modified: 04-29-20 02:49 PM by Chuck - Raymarine - Moderator.)
Post: #7
beast123 Offline
Junior Member
**
 		Posts: 9
Joined: Jan 2019
Reputation: 0
RE: [CA11] 3 MFDs Through HS5 RayNet Network Switch?
So I connected the new E95 to the HSS Network switch and there is no handshake or whatever. The other two MFDs do not see or interface with the new unit. They do see and share data with each other. Is there a trick in getting the new unit to share the data?

I used a 5M seatalk cable attached to the new unit and the HSS network switch. please see the photo. I used the port on the switch where the cap is loose in the photo.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] 3 MFDs Through HS5 RayNet Network Switch? - beast123 - 04-29-20 01:59 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication