Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] C120 heading

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] C120 heading
04-26-20, 08:30 AM (This post was last modified: 04-27-20 10:37 AM by Chuck - Raymarine - Moderator.)
Post: #1
Waterboy Offline
Junior Member
**
 		Posts: 2
Joined: Sep 2017
Reputation: 0
[CA11] C120 heading
Does the C120 unit require an external electronic( fluxgate) compass to show heading
Find all posts by this user
Quote this message in a reply
04-27-20, 10:47 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] C120 heading
Welcome to the Raymarine Forum Waterboy,

Please click here to view a FAQ addressing this subject. If the value of the Heading data item is reported as dashes, then the MFD has not been interfaced to a source of heading data or that source of such data has failed. As the C-Series Classic MFDs will support receiving heading data from its SeaTalk or NMEA 0183 communications interface and Raymarine no longer produces a heading data source having a SeaTalk communications interface, it would be recommended that a third party NMEA 0183 heading data source such, as one of those listed within the referenced FAQ, be interfaced to power and to the MFD's NMEA 0183 Cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication