Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] A67 Not following waypoint
05-17-20, 06:52 AM (This post was last modified: 05-20-20 02:06 AM by Tom - Raymarine - Moderator.)
Post: #1
[TG11] A67 Not following waypoint
My system consist of a A67 MFD, Evoultion Ev-1 with P70 control head and St60+ Speed, Depth and Wind. Everything is communicating. I tell the the A67 to goto waypoint and when I change to Highway screen it says its not following. When I tell it to track it says no data. I have the auto pilot set to on , on the Mfd.
Find all posts by this user
Quote this message in a reply
05-20-20, 02:08 AM
Post: #2
RE: [TG11] A67 Not following waypoint
Hello freebird66,

Could you perhaps post a (clear) video of the operations you're doing? The only reasons I can think of now why an MFD wouldn't do a Goto Waypoint are either if there's no GPS fix or if there's already active navigation data, from another waypoint or an external device.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)