[TG] [TG11] make Axiom source of depth: AirMar N2K
|
05-21-20, 10:57 AM
Post: #3
|
|||
|
|||
RE: [TG11] make Axiom source of depth: AirMar N2K
So the boat is IN the water. And still not seeing depth.
But then I called AirMar and was told to test the AirMar P79 in a 5 gallon bucket of water. When I did that, the Axiom began to see depth! WaLa ! So then I moved the P79 back to the spot I had it in the boat, and once again, no depth... So then I moved it closer to the center-line of the boat (in the bildge) and WaLa, the Axiom started seeing depth! Moral of the story: hook up the AirMar to the Axiom, TEST the location you plan to install it on and make sure you have a depth readout. If you don't see a valid depth readout you have a blockage. Move the AirMar to a new location until you have a depth reading in the Axiom. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[TG11] make Axiom source of depth: AirMar N2K - gulfoslides - 05-17-20, 10:35 AM
RE: [TG11] make Axiom source of depth: AirMar N2K - Tom - Raymarine - Moderator - 05-20-20, 02:13 AM
RE: [TG11] make Axiom source of depth: AirMar N2K - gulfoslides - 05-21-20 10:57 AM
RE: [TG11] make Axiom source of depth: AirMar N2K - Tom - Raymarine - Moderator - 05-22-20, 12:01 AM
|
User(s) browsing this thread: 1 Guest(s)