Raymarine forum / Raymarine Forums / Networking / System Integration v / [TG] [TG11] Connecting spx/st 60 network to a st290 ST2 network

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Connecting spx/st 60 network to a st290 ST2 network
05-30-20, 03:54 AM
Post: #10
JPenny1961 Offline
Junior Member
**
 		Posts: 9
Joined: Dec 2018
Reputation: 0
RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network
Hi Tom,

Thanks for taking the time to reply, and that totally makes sense.

I am half way through an upgrade as attached (boat in Greece with me stuck in the UK with a front room full of Raymarine equipment), but should the ST290 Data & Graphics displays not behave as they should, I was beginning to think about a Plan B to reinstate the DPU in some fashion in order to retain the larger displays.

Thanks again.

JP


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - JPenny1961 - 05-30-20 03:54 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication