Raymarine forum / Raymarine Forums / Multifunction Displays v / [JB] [JB] Perkins M50 Engine Data

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JB] [JB] Perkins M50 Engine Data
05-18-20, 09:54 PM (This post was last modified: 05-20-20 06:58 PM by Jules - Raymarine - Moderator.)
Post: #1
Casey.Matthews Offline
Junior Member
**
 		Posts: 1
Joined: May 2020
Reputation: 0
[JB] Perkins M50 Engine Data
Hi, I've got an older (not sure of the year) Perkins M50 in my 96 beneteau oceanis. I just purchased and installed an Axiom 9 (which I love!).

Is there a way I can connect the Perkins to the Axiom so I can see temp, rpms, etc?
Find all posts by this user
Quote this message in a reply
05-20-20, 07:06 PM
Post: #2
Jules - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 98
Joined: Oct 2019
Reputation: 0
RE: [JB] Perkins M50 Engine Data
Hi Casey.Mathews,

Welcome to the Raymarine forum,

In order to get engine data to an Axiom there need to be sensors on the engine that are capable of sending digital NMEA2000 data. The Axiom is capable of displaying the data of each NMEA2000 compatible engine sensor via a data network. You need to find out from a marine engineer if your Perkins motor can have such sensors fitted.

Happy boating and kind regards
Jules
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication