Transducer options on DSM300 changed

[Chuck - Raymarine - Moderator]

naz14,

The symptom reported would typically be indicative of damage within the fishfinder depth half of the B744V's zip cable. The transducer sense lead within this half of the cable will be used by the sounder module to detect whether a transducer is connected to the sounder module, and if so, whether it is a 600W transducer or a 1kW/2kW transducer. This problem may also be indicative of problem with the DSM300. Should you not have damaged/spliced the fishfinder depth half of the B744V's zip cable and have correctly used the junction box (not supported by Raymarine) to splice the cable, then it would be recommended that the DSM be tested with another transducer which was known to be operation or that the DSM be sent to Raymarine’s Product Repair Center to be bench checked / serviced.