Transducer options on DSM300 changed
|
08-25-16, 12:58 PM
(This post was last modified: 08-25-16 01:41 PM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
RE: Transducer options on DSM300 changed
Thanks for the input Chuck. By the way, the depth half of the zip cable was untouched. Only the temp/speed half was cut and spliced in the Airmar splice/junction box. Maybe I will see if I can find another transducer to borrow to test the DSM. I just don't understand how changing the depth/temp sensor only could have impacted the DSM's ability to recognize the B744V transducer and come up with a new list of 1kw transducers, unless the DSM coincidentally failed at the same time I changed out the temp/speed sensor per Airmars specific instructions?
the future's so bright, i gotta wear shades |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Transducer options on DSM300 changed - naz14 - 08-21-16, 02:49 PM
RE: Transducer options on DSM300 changed - Chuck - Raymarine - Moderator - 08-22-16, 02:20 PM
RE: Transducer options on DSM300 changed - naz14 - 08-25-16, 10:19 AM
RE: Transducer options on DSM300 changed - Chuck - Raymarine - Moderator - 08-25-16, 12:33 PM
RE: Transducer options on DSM300 changed - naz14 - 08-25-16 12:58 PM
RE: Transducer options on DSM300 changed - Chuck - Raymarine - Moderator - 08-25-16, 01:47 PM
RE: Transducer options on DSM300 changed - naz14 - 08-25-16, 02:24 PM
RE: Transducer options on DSM300 changed - Chuck - Raymarine - Moderator - 08-25-16, 03:20 PM
|
User(s) browsing this thread: 1 Guest(s)