Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E78 connection to Uniden Oceanus D VHF-with DSC
10-17-16, 04:02 PM
Post: #1
E78 connection to Uniden Oceanus D VHF-with DSC
Hi Ray Team. Please let me know if I am on the correct track. We just upgraded our nav to the e78, and ITS UTTERLY AMAZING. quick question. How can I connect the Uniden Oceanus D vhf to the e78? Do I need an R70414 cable? or is there another way to get the gps data to flow TO the Radio and the RECEIVED DSC CALL location to show on the e78?

Next- If we DO in fact need that cable, do we also need to apply power to this cable or will it get power from e78?

Thanks for the help.
Find all posts by this user
Quote this message in a reply
10-18-16, 08:57 AM
Post: #2
RE: E78 connection to Uniden Oceanus D VHF-with DSC
Welcome to the Raymarine Forum dmahler,

The NMEA 0183 output leads of the R70414 NMEA 0183 / Video Input Cable would need to be interfaced to the NMEA 0183 input leads of the DSC VHF radio to supply the VHF radio with UTC Time, Latitude, Longitude, SOG, COG, and Date information. The MFD's NMEA 0183 NMEA 0183 PORT 1 would need to be configured to "NMEA 4800". The R70414 NMEA 0183 / Video Input Cable carries signal alone and as such your question concerning powering this cable is not applicable (i.e. no power will be connected to this cable).
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)