Raymarine forum / Raymarine Forums / Networking / System Integration v / Upgrade

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrade
11-16-16, 10:52 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Upgrade
Brian,

Q1. I want to be sure that I understand your reply to this question. It is possible to use the Smart Heading System connected ONLY via NMEA0183 (remove the SeaTalk connection)? If I can use the SHS in that manor, then I understand you to say that if I ever needed to make any calibrations in the future, I would need to add an EV-1 Sensor core (shown in my updated drawing)?
A1. Indeed the e97 MFD should only be shown as being interfaced to the SHS via NMEA 0183 ... specifically, SHS NMEA 0183 OUT -> e97 MFD Port 1 or Port 2 IN. Your drawing correctly shows the installation of an EV-1 Sensor Core in place of a SHS.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Upgrade - mpo881 - 11-15-16, 03:21 PM
RE: Upgrade - mpo881 - 11-16-16, 09:38 AM
RE: Upgrade - Chuck - Raymarine - Moderator - 11-16-16 10:52 AM
RE: Upgrade - mpo881 - 11-16-16, 04:42 PM
RE: Upgrade - mpo881 - 02-16-17, 06:24 PM
RE: Upgrade - mpo881 - 02-20-17, 07:10 PM
RE: Upgrade - mpo881 - 02-21-17, 03:24 PM
RE: Upgrade - mpo881 - 02-27-17, 03:40 PM
RE: Upgrade - mpo881 - 04-01-17, 09:02 AM
RE: Upgrade - mpo881 - 04-03-17, 02:20 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication