Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS data to two VHF radios
11-28-16, 01:56 PM
Post: #1
AIS data to two VHF radios
I have one AIS transponder that is connected to two E127's via NMEA2000 network. One E127 is at an upper helm with a VHF radio and the second E127 is at the lower helm with a second VHF radio. How do I get AIS/GPS data to both VHF radios? The radios have NMEA0183 connections.
Find all posts by this user
Quote this message in a reply
11-28-16, 02:37 PM
Post: #2
RE: AIS data to two VHF radios
Welcome to the Raymarine Forum jrhodes777

Raymarine MFDs are neither designed to bridge AIS data from SeaTalkng/NMEA 2000 to NMEA 0183 nor vice versa. Accordingly, should your VHF radio support use of NMEA 0183 AIS sentences, then a NMEA 2000 to NMEA 0183 data bridging device (ex. Actisense NGW-1-ISO-AIS, etc.) would be need to be installed between the SeaTalkng/NMEA 2000 backbone and the VHF radios. This same data bridge should support supplying the VHF radios with GPS data.
Visit this user's website Find all posts by this user
Quote this message in a reply
11-28-16, 03:52 PM (This post was last modified: 11-28-16 04:28 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: AIS data to two VHF radios
Thanks Chuck.

John Rhodes
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)