Raymarine forum / Raymarine Forums / Autopilots v / M81130Auto Pilot Siezed up

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
M81130Auto Pilot Siezed up
12-01-16, 06:35 AM
Post: #1
Alterboy Offline
Junior Member
**
 		Posts: 5
Joined: Feb 2016
Reputation: 0
M81130Auto Pilot Siezed up
Good Morning , I have a 2007 ST6002 M81130 Type 1 linear drive 12v auto pilot and the drive arm seems to be seized up . I there a way to free this piston .?
THANK YOU FOR YOUR HELP
TOM
Find all posts by this user
Quote this message in a reply
12-01-16, 09:55 AM (This post was last modified: 12-01-16 10:31 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: M81130Auto Pilot Siezed up
Welcome to the Raymarine Forum Tom,

Raymarine autopilots feature a drive limit configuration setting which should configured to a value which will cease supplying power to the linear drive before the drive becomes fully extended or retracted. Failure to properly configure this setting may cause a mechanical drive to be over-extended or over-retracted, causing the linear drive to jam and possibly result in damage to the linear drive. Should this occur then it would be recommended that the linear drive be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication