Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
i70 v. i70s Differences
12-20-16, 10:36 AM (This post was last modified: 12-20-16 10:42 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: i70 v. i70s Differences
Welcome to the Raymarine Forum mlpayne9367,

As you have suggested, the i70S Instrument Displays were introduced in part to match the glass bridge styling of Raymarine's most eS and gS Series MFDs. These same styling changes are found within the recently introduced p70S and p70RS autopilot control heads. From the standpoint of software features and functions, the i70 and i70S are functionally equivalent. The i70s supports an LCD brightness of 1,200 cd/m2 (candelas per square meter or Nits), while the i70 supported a maximum LCD brighness of 700 Nits. In seeking NMEA 2000 compliance and certification, these newly introduced products feature a single SeaTalkng/NMEA 2000 communications port instead of the pair of SeaTalkng/NMEA 2000 communications ports found within the i70, p70, and p70R ... the NMEA 2000 standard permits only one device per spur, whereas the SeaTalkng communications protocol had permitted up to three devices to daisy chained within a single spur.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: i70 v. i70s Differences - Chuck - Raymarine - Moderator - 12-20-16 10:36 AM
RE: i70 v. i70s Differences - alans - 04-18-17, 04:54 PM
RE: i70 v. i70s Differences - alans - 04-19-17, 09:35 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)