Rudder Angle over Seatalk NG from Seatalk

[Bill Kneller]

Chuck,

Thanks very much for the reply and the Actisense NMEA reader output for the NGT-1. I grabbed an NGT-1 and hooked it up along with the NGW-1 and see that the PGN is in fact making it through the NGT-1 but not the NGW-1 (NMEA 0183 gateway). This is on two different boats with the S1G and each boat with its own NGW-1 (same NGT-1), and both have a B&G T41.

I have some debugging to do to determine why the PGN isn't being properly decoded on the NGW-1. I fixed the problem on the T41 with a menu setup so that is fixed.

I am using the NGW-1 to exchage data with OpenCPN and when I find a solution, I'll post a reply here to let people know how this can be accommodated for future installations.