Raymarine forum / Raymarine Forums / Multifunction Displays v / fuse requirement

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
fuse requirement
04-18-17, 01:13 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: fuse requirement
Welcome to the Raymarine Forum Jim,

While the C/E-Series MFDs were designed to supply power to radomes, then were not designed to power open array pedestal. The latter should be powered by a dedicated power circuit which has been protected with a 20A fuse or 15A breaker when powered by a 12V system. Should the MFD not be interfaced to a radome, then its power circuit may be protected with a 6.3A fuse or 5A breaker.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
fuse requirement - jim28 - 04-15-17, 09:58 PM
RE: fuse requirement - Chuck - Raymarine - Moderator - 04-18-17 01:13 PM
RE: fuse requirement - jim28 - 04-18-17, 05:52 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication